Milwaukee M18 Fuel (2804-20) vs Milwaukee M18 Fuel (2904-20)

Milwaukee M18 FUEL 2804-20 Vs DEWALT XR DCD996 Drill Driver Extreme Testing | What Drill is Better?

The Milwaukee M18 FUEL 2804-20 and DEWALT XR DCD996 drill drivers were tested in various conditions. They were tested in cold conditions and both performed well, with the DeWALT appearing slightly faster. In a speed test with new batteries, the DeWALT consistently outperformed the Milwaukee. Both drills were then tested in drilling holes, with the DeWALT feeling more comfortable and faster. In a concrete drilling test, the DeWALT was faster and quieter. Both drills were then subjected to water and air tests, with the DeWALT performing better in the water test. Finally, both drills were subjected to a demolition test, with the Milwaukee showing some damage but still functioning. Overall, both drills performed well, but personal preference may determine which one to choose.

Inside Look: Is Milwaukee M18 GEN 3 1/2" Hammer Drill Driver 2804-20 Worth The Upgrade?

The Milwaukee M18 GEN 3 1/2" Hammer Drill Driver claims to be the strongest drill on the market, but the improvements over the previous GEN 2 model are not significant. In performance tests, the GEN 3 was only slightly faster and smoother than the GEN 2. The engineering and design differences between the two models are minimal, with the GEN 3 being slightly smaller and more compact. Overall, it is hard to recommend upgrading from the GEN 2 to the GEN 3 as a standalone tool. It may be worth waiting for the GEN 4 model.

Milwaukee GEN 4 (2904) 🔥VS🔥 Milwaukee GEN 3 (2804) Hammer Drills

The review compares the Milwaukee GEN 3 and GEN 4 hammer drills. Both drills have fuel brushless motors and drilling and hammer modes. The GEN 4 has more air movement and a smoother trigger. The drills have similar designs and accessories. The GEN 4 is slightly heavier due to additional features. The review demonstrates the drills' performance in various drilling tasks. The GEN 4 offers an auto-stop safety feature. Overall, if the GEN 3 is working fine, there may not be a need to upgrade. The reviewer asks for suggestions on other tools to compare with the GEN 4.

Milwaukee 2804 20 M18 FUEL Hammer Drill Review

The Milwaukee 2804 20 M18 FUEL Hammer Drill is a favorite among contractors due to its powerful torque and speed optimization. It can handle large bits without getting bound up. The newer model is larger and more powerful than the previous generation, with a motor that shuts down to prevent wrist injury. The drill features a blue LED light, forward/reverse/lock positions, torque settings, and drill settings. It has an ergonomic design and comes with a belt clip. The tool is sold without a battery but sits flat and stable.

NEW Milwaukee M18 Fuel Gen 4 Hammer Drill 2904-20 & Impact Driver 2953-20 Kit 3697-22.

The reviewer is retiring their old Milwaukee tools and upgrading to the new M18 Fuel Gen 4 Hammer Drill and Impact Driver set. The kit includes the M18 Fuel Hammer Drill (2904-20) and the Gen 4 Impact Driver (2953-20), along with two XC 5.0 batteries and a dual charger. The Hammer Drill has 1400 inch-pounds of torque, two speed settings, and an auto stop mode. The Impact Driver has 2000 inch-pounds of torque, four modes, and a one-handed bit insertion feature. The reviewer is impressed with the tools' balance and grip. They also received an extra battery as a bonus. They plan to do a more detailed review after using the tools.

New Milwaukee M18 Hammer Drill/Driver 2904

The Milwaukee M18 Hammer Drill/Driver 2904 is a powerful and compact drill that can drill 2 and 9/16 inch holes in wood. It has a durable chuck with 16 settings for different power levels and can achieve up to 2100 blows per minute. The drill also features a bright LED light, a belt hook, and a two-speed transmission. It comes with a 10.5-inch handle and has a maximum RPM of 2100. The drill is suitable for electricians and plumbers and is priced at around $199 for the bare tool and $399 for the kit.

Milwaukee M18 Fuel Drill and Impact Driver | Gen 4 Review 2022

The Milwaukee M18 Fuel Drill and Impact Driver Gen 4 have been updated with improved speed and control. The impact driver now has a max speed of 3,900 rpm and an impact rate of 4,400 impacts per minute. The torque remains at 2,000 inch pounds. The trigger system has been upgraded for smoother acceleration and better control. The impact driver kit is priced at $299.

The M18 Hammer Drill Gen 4 has a two-speed system with a low gear running at 500 rpm and a high gear topping out at 2,100 rpm. The torque has been increased to 1,400 inch pounds. The hammer drill version has a hammering rate of 33,000 beats per minute and features an auto stop mode for safety. The drill kit is priced at $289, while the hammer drill kit is priced at $299. Both kits come with two 5 amp hour batteries and a charger.

All of these options will be available in August 2022.

We Run M18 Fuel Hammer Drill Tests Milwaukee Pipeline Didn't!

The reviewer compared the performance of the Milwaukee M18 Gen 3 and Gen 4 hammer drills. They tested various tasks such as drilling through wood and driving screws. The reviewer found that the two drills performed almost identically in terms of speed and power. However, they noted that the Gen 4 drill had a tighter pickup and a more sensitive trigger. They also tested the drills with different drill bits and found that the Gen 4 struggled with certain tasks, such as driving a switch blade bit. The reviewer concluded that while the Gen 4 had some improvements in terms of features, they preferred the Gen 3 drill overall.

Milwaukee 2904 Gen 4 M18 FUEL Hammer Drill Driver Review

The Milwaukee 2904 Gen 4 M18 FUEL Hammer Drill Driver is a powerful tool with a half-inch all-metal chuck and a brushless motor. It has a mechanical clutch with 16 positions and a variable speed trigger. The hammer mode delivers up to 33,000 blows per minute, making it effective for drilling concrete. The tool also features an auxiliary handle and an auto stop function to prevent kickback. It weighs around five pounds with a 5 amp hour battery and has a height of 10 inches. The drill driver can be purchased as a kit with two batteries for $299 and comes with a five-year warranty.

Milwaukee vs DeWalt Hammer Drill - Flexvolt DCD999 vs M18 Fuel 2904

The Milwaukee Flexvolt DCD999 and the DeWalt M18 Fuel 2904 are both top-performing hammer drills. In performance tests, the Milwaukee drill showed higher torque and faster drilling speeds with its upgraded batteries. However, the DeWalt drill performed better in concrete drilling due to its higher hammer rate. The Milwaukee drill is shorter and lighter than the DeWalt drill. In terms of price, the Milwaukee drill starts at $199 for the bare tool, while the DeWalt drill starts at $239. Overall, both drills are considered top-tier and offer good value for professionals.