Milwaukee M18 Fuel (2804-20)
SOURCE ARTICLES
Reviews for Milwaukee M18 FUEL 18V Lithium-Ion Brushless Cordless 1/2 in. Hammer Drill/Driver (Tool-Only)
www.homedepot.com
The Milescraft 14000713 Saw Guide is a great tool for making straight cuts with the Milwaukee M18 jigsaw. It comes with four sizes of rulers, and the 'C' ruler should be used. The guide is secured in place with two supplied screws. Overall, it allows the jigsaw to make precise and accurate straight cuts.
2018 Milwaukee M18 Fuel Gen 3 Hammer Drill 2804-20 Honest Review
toolcraze.net
The Milwaukee M18 Fuel Gen 3 Hammer Drill 2804-20 is a compact and powerful tool with 1,200 in-lbs torque. It is the smallest high torque hammer drill on the market and performs well in drilling and driving tasks. The Gen 3 model improves on the previous version by fixing the side handle connection issue. However, it lacks the separate mode collar and the ability to use a depth rod. Overall, it is a highly recommended tool for its size and performance.
Milwaukee gen 3 Hammer drill and Impact driver review by Tools in Action!
forum.toolsinaction.com
The reviewer tested the Milwaukee gen 3 Hammer drill and Impact driver on 12ga steel, drilling 60 holes. The drill shut off once when binding, similar to the gen 2 model. The compact size and torque were praised, and the new chuck held the bit tight without slipping. The gen 2 chuck had an odd thread size.
SOURCE VIDEOS
The Best Hammer Drill On The Market! Milwaukee M18 2804-20/22
m.youtube.com
The Milwaukee M18 2804-20/22 is a top-of-the-line hammer drill. It comes with a handle, two 5 amp hour batteries, and a multi-voltage charger. The 5 amp hour batteries are perfect for a hammer drill, providing a good balance of runtime and size. The drill is brushless and has a forward/reverse lever, adjustable clutch, and LED light. It also has a half-inch chuck, belt clip, and on-tool bit holder. The drill is highly regarded and a great choice for any Milwaukee tool user.
Milwaukee M18 Fuel Brushless 1/2" Hammer Drill Review - 2804 | Drills - ep.4 pt.1
m.youtube.com
The Milwaukee M18 Fuel Brushless 1/2" Hammer Drill (model number 2804) is the third generation of Milwaukee's top-of-the-line drill. It is shorter, more powerful, and lighter than previous models. The drill has a power state brushless motor that delivers up to 1200 inch pounds of torque and 2000 RPMs. It is the most compact drill in its class and is equipped with the red link plus for maximum performance and protection. The drill has a metal chuck for increased bit grip strength and corrosion resistance. It comes with a belt clip and has a LED light. The drill has a variable speed trigger and 14 clutch settings. It weighs 3.2 pounds and has a BPM of 32,000. In performance tests, it ranked second with a total performance number of 16.68 seconds.
Milwaukee® M18 FUEL™ 1/2" Hammer Drill/Driver
m.youtube.com
The Milwaukee M18 FUEL 1/2" Hammer Drill/Driver is praised for its power, speed, and versatility. It can easily handle metal, concrete, and wood. The compact size allows for easy maneuverability in tight spaces. The auto stop feature enhances safety and prevents accidents. The drill holds the chalk securely and is well-built. Overall, it is highly recommended for any trade.
Milwaukee M18 FUEL 2804-20 Vs DEWALT XR DCD996 Drill Driver Extreme Testing | What Drill is Better?
The Milwaukee M18 FUEL 2804-20 and DEWALT XR DCD996 drill drivers were tested in various conditions. They were tested in cold conditions and both performed well, with the DeWALT appearing slightly faster. In a speed test with new batteries, the DeWALT consistently outperformed the Milwaukee. Both drills were then tested in drilling holes, with the DeWALT feeling more comfortable and faster. In a concrete drilling test, the DeWALT was faster and quieter. Both drills were then subjected to water and air tests, with the DeWALT performing better in the water test. Finally, both drills were subjected to a demolition test, with the Milwaukee showing some damage but still functioning. Overall, both drills performed well, but personal preference may determine which one to choose.
Inside Look: Is Milwaukee M18 GEN 3 1/2" Hammer Drill Driver 2804-20 Worth The Upgrade?
The Milwaukee M18 GEN 3 1/2" Hammer Drill Driver claims to be the strongest drill on the market, but the improvements over the previous GEN 2 model are not significant. In performance tests, the GEN 3 was only slightly faster and smoother than the GEN 2. The engineering and design differences between the two models are minimal, with the GEN 3 being slightly smaller and more compact. Overall, it is hard to recommend upgrading from the GEN 2 to the GEN 3 as a standalone tool. It may be worth waiting for the GEN 4 model.
Milwaukee GEN 4 (2904) 🔥VS🔥 Milwaukee GEN 3 (2804) Hammer Drills
The review compares the Milwaukee GEN 3 and GEN 4 hammer drills. Both drills have fuel brushless motors and drilling and hammer modes. The GEN 4 has more air movement and a smoother trigger. The drills have similar designs and accessories. The GEN 4 is slightly heavier due to additional features. The review demonstrates the drills' performance in various drilling tasks. The GEN 4 offers an auto-stop safety feature. Overall, if the GEN 3 is working fine, there may not be a need to upgrade. The reviewer asks for suggestions on other tools to compare with the GEN 4.
Milwaukee 2804 20 M18 FUEL Hammer Drill Review
The Milwaukee 2804 20 M18 FUEL Hammer Drill is a favorite among contractors due to its powerful torque and speed optimization. It can handle large bits without getting bound up. The newer model is larger and more powerful than the previous generation, with a motor that shuts down to prevent wrist injury. The drill features a blue LED light, forward/reverse/lock positions, torque settings, and drill settings. It has an ergonomic design and comes with a belt clip. The tool is sold without a battery but sits flat and stable.
+ 4
AI COMPARISON
Product Attributes
| Attribute | Specification |
|---|---|
| Height | 220 mm |
| Weight | 1451.5 g |
| Width | 175 mm |
| Max Drilling Speed | 2000 rpm |
| Hammering Action | 32000 bpm |
| Chuck Size | 13 mm |
| Volume | 2040.5 cm³ |
| Thickness | 53 mm |
| Drill Type | Hammer |
| Reversible Drill | Yes |
| Cordless | Yes |
| LED Light | Yes |
| Travel Bag | No |
| Rotary Hammer Drill | No |
| Warranty Time | 5 years |
| Voltage | 18V |
| Brushless Motor | Yes |
| Variable Drilling Speed | Yes |
| Keyless Chuck | Yes |
| Pin Chuck | No |
| High Precision Chuck | No |
Summary of Reviews
Pros
- Compact and Powerful: Frequently mentioned as highly compact and powerful, ideal for heavy-duty tasks.
- Brushless Motor: Offers up to 60% more power and up to 2x speed under heavy load, although some disputes exist regarding these claims.
- Enhanced Bit Grip and Durability: Features an all-metal chuck with improved bit grip strength and resistance to corrosion.
- Improved LED Light Position: Now at the bottom of the handle for better illumination.
- Redesigned Side Handle: Provides better grip and resolves previous issues with the handle breaking off during high torque applications.
- Long Battery Life: Recommended to use with 5 amp hour batteries for optimal runtime.
- Multiple Configurations Available: Comes as a bare tool or part of a kit with accessories.
- Warranty: Comes with a 5-year warranty.
Cons
- Questionable Claims of Increased Power: Some users dispute the claimed 60% more power and note similar shutdown issues under heavy load as previous models.
- Lacks Some Premium Features: No rotating side handle or depth rod, which are available in other high torque drills.
- No Significant Advancements from Gen 2: Performs similarly to the previous generation in many respects.
Conclusion
The Milwaukee M18 Fuel (2804-20) is a top-of-the-line cordless hammer drill praised for its compactness, power, and durability. Ideal for users needing a robust tool for serious drilling and hammering tasks, it combines advanced features like a brushless motor and variable speed settings. However, potential buyers should note the mixed feedback regarding the power improvements over previous generations and the absence of some high-end features like a rotating side handle. Overall, it's a solid choice for professionals and serious DIY enthusiasts, particularly those loyal to the Milwaukee brand and requiring a dependable, powerful drill.
PRICES
ASK AI
BestVs.ai
Hello, I'm your AI shopping assistant. How can I help you?
AI can make mistakes. Consider checking important information.
